Results 1 to 4 of 4
  1. #1
    BELOW2DOE's Avatar
    Join Date
    Sep 2017
    Location
    Tasmania Australia
    Posts
    16

    Dual Field Headphones.

    Hi Guys.

    Can anybody please tell me can you fix the runner on the headphones where it goes into the phones. One of them is broken on top corner back & top of front and wont hold on to the slider, Can you get these as a spare and do they pull out of the back of the head phones.

    Regards below2doe.

  2. #2
    deolslyfox's Avatar
    Join Date
    Jul 2008
    Location
    Central Florida
    Posts
    48,436
    Do a search in the Accessories forum for "Headphone Repair". There are two threads on BHID headphone repair that will be helpful. For some reason I can't copy and paste the URLs here.
    If there's anything I hate worse than diggin' pulltabs, its missin' a gold ring.

  3. #3
    BELOW2DOE's Avatar
    Join Date
    Sep 2017
    Location
    Tasmania Australia
    Posts
    16
    Thanks Fox,

    I got in touch with the Australian Distributor today and all is ok All i had to do was in the centre of the bracket that holds the adjustment arm that is fixed to the headphone is push a screw driver through the centre of the bracket and it will come off leaving a bit sticking up. I then put some silicone on top of it and then pushed it inside the headphone so the silicone will cause it to stick and not rattell around inside the phone.

    Then i just push the new bracket which has a umbrella head on it inside the headphone and then attach the sliding arm through the bracket and all is sweet.


    Regards Below2doe.

  4. #4
    deolslyfox's Avatar
    Join Date
    Jul 2008
    Location
    Central Florida
    Posts
    48,436
    Thanks for sharing !!
    If there's anything I hate worse than diggin' pulltabs, its missin' a gold ring.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in