Results 1 to 5 of 5
  1. #1

    Join Date
    Nov 2016
    Location
    Western NY State
    Posts
    22

    TRX Continues to Beep

    Hey Guys - any thoughts on this? Many times with my TRX, I will get a signal target in the hole and the TRX continues to beep and vibrate even after I remove it from the hole. I will have to either push the button and reset or turn it off and on altogether. This will happen to me several times during a hunt and just wondering if I am doing something wrong with it?

  2. #2
    rchalker's Avatar
    Join Date
    Dec 2010
    Location
    Youngstown, Ohio, USA
    Posts
    6,637
    Are you turning it on while having it next to the ground for it doesn’t detect the mineralization in the soil? (Place tip of pinpointer on ground where there’s no target, turn on.) Maybe you have the sensitivity set too high. Just a thought.
    AKA: Rodney _______ Detectors Used:
    ___________________White's Spectra V3i with DX-1
    ___________________White's TreasurePro
    ___________________Bounty Hunter Discovery 3300



  3. #3
    deolslyfox's Avatar
    Join Date
    Jul 2008
    Location
    Central Florida
    Posts
    47,455
    Just put the nose on the ground and tap the button to regain ground balance ....
    If there's anything I hate worse than diggin' pulltabs, its missin' a gold ring.

  4. #4
    rchalker's Avatar
    Join Date
    Dec 2010
    Location
    Youngstown, Ohio, USA
    Posts
    6,637
    Like Fox said too.
    AKA: Rodney _______ Detectors Used:
    ___________________White's Spectra V3i with DX-1
    ___________________White's TreasurePro
    ___________________Bounty Hunter Discovery 3300



  5. #5
    Darwin Hartman's Avatar
    Join Date
    Jul 2015
    Location
    Long beach Wa
    Posts
    2,224
    What Fox said....
    Just Swing and Dig......(einfach Zu schwingen und graben......)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in